Photo 12

Right rocker alignment. The forward rocker area is completed where the rocker meets the front fender skin, (not shown). Photo shows placement of rocker ready to be scribed for the butt weld to this body panel. Photo also shows the door post butt welded to the outer body skin. There are no door posts available for a "D". I changed them. I removed the recessed "wedge" and welded a piece to close the wedge opening and changed the shape of the door post at the top to match the upper door shape. Note the clean radius that matches the door radius. This was hammered prier to welding any of the rocker in place including the front door radius.